Sometimes you may want to know which process is accessing a particular file
or filesystem — for example, if you get a “device is busy” error message.
fuser will provide this information.
Tip of the Trade: Because sometimes you need to know which process is accessing a particular file or filesystem.
Basic usage is: fuser filename.txt, which will give you this
That number is the ID of the process that’s accessing the file. Use fuser -u filename.txt to see which user owns the process:
For more information, use fuser -v filename.txt:
USER PID ACCESS COMMAND /home/juliet/filename.txt: juliet 13644 f.... more
This shows the user and PID, as well as information about how
the file is being accessed (here, f, indicating an open file), and the command being used
to access it (here, more).
The -m switch shows all process accessing the filesystem, which the
file is on; or you can simply specify a filesystem rather than a file. So
fuser -m /dev/sdb1 output looks like:
/dev/sdb1: 18647c 16875m 7122c 19579m 1606c 7258c 5760c 13644c
Most of these processes are accessing the current
directory (c), with a couple using shared libraries (m). Use the -v switch, to get more information.
To kill all processes accessing a particular file, use fuser -k
filename.txt (add -i for a confirmation message before each
kill). You can also use fuser on network ports: fuser -n tcp 21. This will show which process is using port 21 (useful if you get
a ‘port busy’ message).