dcsimg

Moore's Law Continues Holding True for Intel Chips

By Andy Patrizio (Send Email)
Posted Jan 30, 2007


Late last week, Intel announced a breakthrough in chip design involving the use of new metals for the manufacturing of 45 nanometer transistors.

Intel chips are shrinking, yet again. This time, they're going down to 45 nanometer transistors. New metals are enabling faster and smaller chips to be manufactured.

This makes a hole in the performance/size wall Intel was fast approaching.

Discuss this article in the ServerWatch discussion forum

"This is so important. The semiconductor guys were facing some really challenging physical constraints that if they had not solved them, would have made all of the progress they've made come to a grinding halt," said semiconductor analyst Nathan Brookwood of Insight64.

In a briefing at Intel's headquarters, Mark Bohr, senior fellow at Intel, said the high-k and metal gate advances allow Moore's Law — which states processor performance doubles every 24 months — to continue to apply.

Silicon dioxide has been used to make the transistor gate in semiconductors for 40 years, hence the name "Silicon Valley." But Intel and other semiconductor makers have shaved the layer down to literally five atoms of thickness. This was leading to heat leakage and wasted electrical current.

With the new high-k and metal gate technology, Intel is now able to get its transistors down to the 45nm range, which translates to twice the transistor density, a 30 percent reduction in transistor power, a 20 percent improvement in transistor switching speed and a 10-fold reduction in power leakage. Intel said it will begin the new manufacturing process later this year.

"These performance and leakage improvements would not be possible without high-k and metal gate improvements," said Mohr. The new metals in the gate are thicker and prevent leakage of power.

Intel would not reveal all of the ingredients of its secret sauce. One of the new metals it would discuss is Hafnium, element 72 on the periodic table. According to Wikipedia, Hafnium is used in the control rods in nuclear reactors for its ability to absorb neutrons, and has excellent mechanical properties.

The first product based on this technology is a 45nm processor family codenamed Penryn. It will be packed with 410 million transistors, a big jump from the 290 million in the current generation. This is mostly due to a larger cache and the new SSE 4 instruction set for media and high performance computing applications.

This will translate into higher performance and faster clock rates in the same thermal layer as previous generations of processors. Penryn server chips will run at 80 watts, desktops at 65 watts and mobile parts at 35 watts.

All of which means smaller and faster chips for the consumer, said Brookwood. "For the consumer, this make it possible for transistors to get smaller and use less power, which means improved battery life, and it lets Moore's Law continue," he said.

This article was originally published on internetnews.com.

Page 1 of 1


Comment and Contribute

Your name/nickname

Your email

(Maximum characters: 1200). You have characters left.


 

 


Thanks for your registration, follow us on our social networks to keep up-to-date